Snow Thrower Safety Practices to Keep in Mind

Clearing snow and ice from driveways, sidewalks and parking lots is no small job. You rely on your outdoor power equipment to do the heavy lifting, and it’s important to keep safety in mind. The Outdoor Power Equipment Institute (OPEI) reminds home and business owners to use snow throwers, often referred to as snow blowers, safely and offers tips to help.

“Weather today is unpredictable. You need to have your snow thrower serviced and ready to power up,” says OPEI President and CEO Kris Kiser. “Review your owner’s manual so you can use your equipment safely.” Kiser says preparation is key and that home and business owners should consider the following:

Review the owner’s manual. Check the owner’s manual for safe handling procedures. If the manual cannot be found, look it up online, and store a copy on your computer so it’s available to reference in the future. Review how to operate controls. Be able to shut off equipment quickly.

Check equipment. The snow thrower should be powered off when being checked over. Adjust any cables and check the auger.

Charge batteries. Locate the batteries for your snow thrower and charge them fully before it snows.

Purchase fuel. Be sure to use the correct fuel recommended by the equipment’s manufacturer. For most gasoline-powered snow throwers, that is E10 or less. Often fuel stations are closed after a storm so buy gasoline in advance of storms. Fuel that is more than 30 days old can phase separate and cause operating problems. For more information on fueling properly see www.opei.org/programs/ethanolwarning

Store and use fuel properly. Place gasoline in a proper fuel container and label it with the date purchased and the ethanol content. Store fuel safely and out of the reach of children. Fill the fuel tank outside before starting the engine and while the engine is cold. Never add fuel to a running or hot engine.

Clear the area. Snow can sometimes hide objects. Doormats, hoses, balls, toys, boards, wires, and other debris should be removed from areas you intend to clear. When run over by a snow thrower, these objects may harm the machine or people.

Dress for winter weather. Locate safety gear now, and place it in an accessible closet or location. Wear safety glasses, gloves and footwear that can handle cold and slippery surfaces when operating the snow thrower.

KEY SAFETY TIP: Never put your hands inside the auger or chute. Use a clean out tool to unclog snow or debris from the snow thrower. Your hands should never go inside the auger or chute.

Turn OFF the snow thrower if you need to clear a clog. If you need to remove debris or unclog snow, always turn off the snow thrower. Wait for all moving parts to come to a complete stop before clearing any clogs or debris.

Operate in visible conditions. Never operate the snow thrower without good visibility or light.

Aim with care. Never throw snow toward people or cars. Keep children or pets inside and away from your snow thrower when it is operating.

Use extreme caution on slopes and hills. Use caution when changing directions on slopes.

Do not attempt to clear steep slopes.

Know where the cord is. If using an electric powered snow thrower, be aware of where the power cord is at all times. Avoid tripping.

About OPEI
OPEI is an international trade association representing manufacturers and suppliers of power equipment, small engines, battery power systems, portable generators, utility and personal transport vehicles, and golf cars. OPEI is the advocacy voice of the industry, and a recognized Standards Development Organization for the American National Standards Institute (ANSI) and active internationally through the International Organization for Standardization (ISO), and the International Electrotechnical Commission (IEC) in the development of safety and performance standards. OPEI owns Equip Exposition, the international landscape, outdoor living and equipment exposition, and administers the TurfMutt Foundation, which directs the environmental education program, TurfMutt. OPEI-Canada represents members on a host of issues, including recycling, emissions and other regulatory developments across the Canadian provinces.